Micro Seiki Genuine Tone Arm Base for MR-411 Weight 39g
Tone arm mount that can be used with this product is approx. This arm base is an original part. There is a scratch on this screw part. Secondhand item, made in Japan. Used item.
Tone arm mount that can be used with this product is approx. This arm base is an original part. There is a scratch on this screw part. Secondhand item, made in Japan. Used item.
This is custom made high precision Turntable Platter Mat. It is milled from solid Duralumin which is Aluminium-Copper Alloys (95% aluminium, 4% copper, 0.5% manganese and 0.5% magnesium) which is much stronger and lighter than copper and popular in Airospace industry due to their strength and light weight and withstanding in heat. It takes countless hours to achieve the final high precision outcome and edge was cut with diamond cutting to give beveled edge. We only can offer 3 units in total so grab it while you can. It is benchmarked Micro Seiki CU-500 with same thickness but used Duralumin instead of copper which is susceptible to corrosion and softer material. By using this Duralumin Platter Mat, tracing will dramatically improve, and you can expect sound quality as well. Material: Aircraft aluminum alloy / Duralumin Size: Approx. Top Side 288mm Wide, Bottom Side 294mm Wide / Thickness: 5mm Weight: Approx. 910g Thank you and hope you enjoy this gorgeous turntable mat to transform your vinyl experience to higher level.
Micro Seiki Turntable MR-411 Accessories pocket Cover USED Wood product Japan Description It is a used and made in Japan. This is a Micro Seike genuine parts. This item is the product which was produced 1973. This item fit MR-411 Condition: Good condition. USED ShippingWe always send the item with a tracking number. So please place an order without any concern on delivery. You can always track the delivery status.Shipping is only available to the address registered in eBay. If you want us to send another address, please change your address on eBay and then place an order.Shipping is available from Monday to Friday. Weekends are not available because freight (shipping) companies are closed.We do not mark merchandise values below value or mark items ?gifts? ? Japan, US and International government regulations prohibit such behavior.If your address is in the remote areas defined by the freight (shipping) company, please pay the additional shipping fees with PayPal. SHIPPING COST SHIPPING COST USA ASIA SHIP ORDER VIA JAPAN POST SMALL PACKET( WITH TRACKING NUMBER ) AUSTRARIA SHIP ORDER VIA JAPAN POST SMALL PACKET(WITH TRACKING NUMBER ) EUROPE SHIP ORDER VIA JAPAN POST SMALL PACKET ( WITH TRACKING NUMBER ) ASIA USA$11(JAPAN POST SMALL PACKET) CANADA AUSTRARIA$11(JAPAN POST SMALL PACKET) EUROPE$11 (JAPAN POST SMALL PACKET )About Importer’s ObligationImport duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer’s responsibility. Please check with your country’s customs office to determine what these additional costs will be prior to bidding or buying. Thank you for your understanding.
Fits Yamaha Models: YP-211 SX-69006 YP211 SX69006.
Beautiful Rose Gold plated Headshell, Cartridge and Stylus. A stunning headshell plated in Rose Gold fitted with the latest Audio Technica cartridge and Stylus producing superb quality sound. This Rose Gold headshell will enhance the beauty of any Turntable but especially natural or wood effect Turntables.Designed to complement the beauty of Turntables that are typically on display. Fits: Micro SeikiDD40, DD35, MR322, BL77 All the tabs and connections on the headshell are Gold plated for the best signal transfer possibleThe very latest Audio Technica VM series dual magnet cartridgeWarm vibrant, perfect mid tones and bassExceptional quality – typical of Audio Technica CartridgesHand made exclusively by AudioOrigin in England from the finest available parts. Made and shipped from the UKThis is a complete unit with Headshell, Cartridge and Stylus – ready to just plug in, balance and play.Instructions are included Postage:North America typically 8-10 daysEU typically 5-7 days 14 day “any reason” return plus a full warranty
Beautiful Black Headshell Bundle with AT VM95C Cartridge and StylusV2 Pro Advanced Synthetic Lubrication Oil A Top quality Aluminium Black Headshell with a superb sounding Audio Technica VM95C Cartridge fitted using OFX Copper cables for perfect sound transfer and brass fittings to push mass to where it is needed most. V2 Pro specially formulated Synthetic, ultra-fine spindle/ motor oil – eliminates noise and rumble for an ultra-quiet, smooth rotating platter. A vital upgrade to any turntable Fits: Micro Seiki BL91, DD24, MB10 Audio Technica and V2 Pro Advanced Synthetic Oil Bundle – Superb Upgrade BundleIncludes The renowned Audio Technica VM95C Cartridge Fitted to a Black Aluminium HeadshellOFC Wires used for perfect signal transfer an d Brass Fittings for perfectly placed massV2 Pro Lubrication – Eliminates Vibration and Rumble quite simply one of the best turntable upgrades you can getInstructions are included Postage:North America typically 8-10 daysEU typically 5-7 days 14 day “any reason” return plus a full warranty
DDL60, DD1, BL51, MB15. This Rose Gold headshell will enhance the beauty of any Turntable but especially natural or wood effect Turntables. All the tabs and connections on the headshell are Gold plated for the best signal transfer possible.
Model: 8081D. Micro Seiki C-2 / M207. Make: Empire. Replaces Stylus.
DD5, DD22, Solid 5, Solid 1. This Rose Gold headshell will enhance the beauty of any Turntable but especially natural or wood effect Turntables. All the tabs and connections on the headshell are Gold plated for the best signal transfer possible.
Beautiful Rose Gold plated Headshell, Cartridge and Stylus. A stunning headshell plated in Rose Gold fitted with the latest Audio Technica cartridge and Stylus producing superb quality sound. This Rose Gold headshell will enhance the beauty of any Turntable but especially natural or wood effect Turntables.Designed to complement the beauty of Turntables that are typically on display. Fits: Micro SeikiBL91, DD24, MB10, DD20 All the tabs and connections on the headshell are Gold plated for the best signal transfer possibleThe very latest Audio Technica VM series dual magnet cartridgeWarm vibrant, perfect mid tones and bassExceptional quality – typical of Audio Technica CartridgesHand made exclusively by AudioOrigin in England from the finest available parts. Made and shipped from the UKThis is a complete unit with Headshell, Cartridge and Stylus – ready to just plug in, balance and play.Instructions are included Postage:North America typically 8-10 daysEU typically 5-7 days 14 day “any reason” return plus a full warranty