Pular para o conteúdo

ZYX Ultimate Dynamic 0.15mV Low Output MC Cartridge, Made in Japan

  • por

This is One set ZYX Ultimate Dynamic 0.15mV Low Output MC Cartridge , made in Japan by ZYX. TB2, ZN Premounted with 18K Terminal Pine.Condition: Brand new in box, not used beforeZYX ULTIMATE AIRYWorld First C-1000 Carbon Cantilever in Moving Coil Cartridge The ZYX Ultimate series (100, Airy, 4D, OMEGA and DYNAMIC) use a carbon cantilever for the very first time in a moving coil cartridge. The carbon rod is made from 1000 pieces of composite carbon fiber, hence the name C-1000 carbon cantilever. This composite carbon fiber is more rigid than aluminum, iron and titanium. In addition, its specific gravity is just half that of boron. Therefore we can be sure that the C-1000 carbon cantilever is the ultimate and ideal cantilever material for analogue record playback. The carbon cantilever gives the widest frequency range and a superior tracking performance. A further major benefit is that the mechanical sound signal picked up at the stylus can travel through to the coil in a straight and direct fashion by way of the 1000 pieces of mechanical carbon lines. This ensures that reflected, repeated or modulated mechanical sound signals are completely absent. The overall result is that you will enjoy some of the finest, most natural, most dynamic and true to source sound available. Double Structure Body By combining non-metallic materials in the construction of the body, the resonances occurring on the body’s surface are excluded from influencing the generator system. An additional advantage is that this method of construction is both light and rigid. High speed reproduction engine (magnetic circuit) This circuit is specially processed to null magnetic resistance within magnetic gap, and enables high speed power generation against signals over the entire bandwidth uniformly without time delay. Micro-Ridge Stylus The stylus used in the Ultimate series has the edges of the diamond shank set parallel to the sides of the cantilever. Using this type of stylus, the hardest axis of the crystal is aligned to act as the contact point with the record groove. This gives stable and smooth tracing and produces a very refined sound, with the additional benefit of giving the stylus an extended life of approximately 2000 hours. The stylus is of the Micro-ridge type, which was originally developed in Japan and offers the highest performance. The contact radius is always 3μm by the ridge made with 6μm thickness. Technical Data Type Moving Coil (Dynamic) “REAL STEREO” Generator System Cryogenic Treatment Temperature: -196 ℃ (-320оF) Output Voltage 0.15mV (3.54cm/sec, 1kHz) Frequency Response±1dB 10 Hz – 100 kHz 20 Hz – 20 kHz Channel Separation > 30dB 〔 1kHz 〕 Channel Balance < 0.5dB 〔 1kHz 〕 Recommended Tracking Force 2.0gm 〔 20 ゜C-25 ゜C 〕 Tracking Force Range 1.7gm – 2.5gm Trackability >60μm /2.0gm EQ Compliancehorizontal vertical 15×10-6cm/dyne 12×10-6cm/dyne Internal Impedance 12 Ω Load Impedance > 100Ω Coil Wire 6N OFC Crystal Copperφ0.035mm Cantilever Material C-1000 Composite Carbon φ0.30mm Stylus Micro-Ridge Solid Diamond□0.1mm Contact Radius, Life Time 3μm×60μm, 2000Hour/2.0gm Output Terminals φ1.25mm K18 Solid Gold 〔EIA〕 Terminal Board Composite Carbon Plate Dimensions 16.8mm(W)×19.0mm(L)×16.5mm(H) Net Weight 6.8gm(TB2 pre-mounted), 8.0gm(SB2) WORLDWIDE SHIPPING BY EXPEDITED AIR PARCEL WITH TRACKING INFORMATION AT USD50.-International Buyer and/or recipient are responsible for paying all customs taxes/VATs/import duties that MAY be imposed by your country’s customs bureau. More information can be obtained by contacting your local customs office.Appearance, packaging design and specifications are subject to change without notice for the purpose of Improvement by the manufacturer.The images were taken accurately, but slight colour variations may occur. Thank you for your understanding!If you have any other questions, please do not hesitate to contact me.

ZYX Premium Omega S, 5N Silver 0.24mV Low Output MC Cartridge, Made in Japan

  • por

This is One set ZYX Premium Omega S 5N Silver Wire 0.24mV Low Output MC Cartridge, made in Japan by ZYX. Condition: Brand new in box, not used beforeThe world’s first High-speed generation system Eddy currents which occurs in generation system raises the magnetic impedance in the circuit and affects to the transient response of the sound signal, and as a result, the reproduced sound is badly deteriorated. Eddy currents which occur on a pair of opposite pole faces (N pole, S pole) reverse phase each other. There should be a solution to eliminate such eddy currents. However, ZYX has discovered that there are two pairs of the eddy currents existing in the magnetic circuit and therefore, it is necessary to neutralize and eliminate these two pairs of the eddy currents at once. The “Premium” series cartridges are equipped with a new “Balanced type eddy current elimination mechanism” which we developed to solve this problem, and succeeded to reproduce an accurate time axis of the sound signal by non-magnetic impedance. Employment of a new suspension wire The new material which was not thought about in the past are developed one after another. One of them is a thin and tough material while being flexible. The suspension wire of MC cartridge is to hold and position the fulcrum of the rotary vibration of the cantilever, and a hard metal wire like piano wire has been commonly used conventionally. Instead of a hard metal wire, we employed in Premium series new optimal material without aging, tough and of superior temperature characteristics. This brought an improvement in tracking ability and a sense of pitch that soaks into a soul. As a result, the true analog sound of Premium series was further improved in the sense of reality. Lapis lazuli Balancing Weight A spherical object fixed to the front nose of Premium OMEGA is a balancing weight to accord the sweet spot of the cartridge body and the gravity point of vibration system. Having checked up materials and repeated audio monitoring, a nonmetal Lapis lazuli ball having hardness 5.0, specific gravity 2.5, diameter 8mm, and weight about 1 gram is put in at the most appropriate position to form the best cartridge structure. The Labis Lazuli ball used in OMEGA’s other advantage is centroid control. Due to its composition blended of a few kinds of sodalite having spherical shape, vibrating wave flown from the north pole of the ball is absorbed in the crystal architecture mingled inside, and vibrating wave running down the ball surface is finally cancelled at the south pole of the ball. 15 items in generator ZYX only succeeded in development of a MC cartridge which does reproduce original stereo sound with a perfect sound balance between the left and right channel. 2 Layer Laminate Armatures We made the armature structure have double layers, facing each other with opposite polarity, namely one laminate to face N-polarity and the other S- forming mutually reversed phase positions in order to short-circuit and simultaneously dissolve both eddy-currents generated in each armature. K18 Gold Solid Terminals Maximum quality 18-karat solid gold matches sapphire terminal board and gets rid of sound coloration unlike conventional plated terminals. Those are apt to create coloration against subtle output signal in micro ampere order due to battery effect between heterogeneous metals. Sapphire Ternimal Board This non-metal mineral is hard next to diamond, and has been employed as OMEGA’s and DIAMOND’s terminal board to lock up output terminal pins and statically holds the unit against any sorts of extraneous vibrations. Technical Data Type Moving Coil (Dynamic) “REAL STEREO” Generator System Cryogenic Treatment Temperature: -196 ℃ (-320оF) Output Voltage 0.24mV (3.54cm/sec, 1kHz) Frequency Response ±1dB 10 Hz – 100 kHz 20 Hz – 20 kHz Channel Separation > 30dB 〔 1kHz 〕 Channel Balance < 0.5dB 〔 1kHz 〕 Recommended Tracking Force 2.0gm 〔 20 ゜C-25 ゜C 〕 Tracking Force Range 1.7gm – 2.5gm Trackablity > 60μm EQ Compliancehorizontal vertical 15×10-6cm/dyne 12×10-6cm/dyne Internal Impedance 4.0 Ω Load Impedance > 100Ω Coil WireX type S type G type 6N Crystal Copper φ.035mm/CRYO 5N Silver φ 0.035mm/CRYO 5N Gold φ 0.035mm/CRYO Cantilever Material Boron solid φ 0.30mm Stylus Micro-Ridge Solid Diamond 0.07mm Contact Radius, Life Time 3μm×60μm, 2000Hour/2.0gm Output Terminals φ1.25mm 18 Karat Gold 〔 EIA 〕 Terminal Board Pure Sapphire Plate Front Sub Weight Lapis lazuli ball φ8mm, 1.2gm Dimensions W (Width) : 16.8mm L (Length) Body / with Terminals : 25.0mm / 29.2mm H (Height) : 16.5mm Net Weight 6.7gm (TB2 attached) SHIPPING TO WORLDWIDE BY EMS SPEEDPORT WITH TRACKING INFORMATION AT USD30.-Buyer is responsible for your country’s (destination) import taxes/VATs/customs duty. If you have any questions, please do not hesitate to contact me.

ZYX Ultimate Airy-G 24K Gold 0.24mV Low Output MC Cartridge, Made in Japan

  • por

This composite carbon fiber is more rigid than aluminum, iron and titanium. In addition, its specific gravity is just half that of boron. Therefore we can be sure that the C-1000 carbon cantilever is the ultimate and ideal cantilever material for analogue record playback.

ZYX OMEGA S/SB2 5N Silver 0.24mV Low Output MC Cartridge, Made in Japan

  • por

This is One set ZYX OMEGA-S/SB2 with Silver Base. This Cartridge coil is 5N Silver 0.24mV Low Output MC Cartridge , made in Japan by ZYX. ZN Premounted.ZYX OMEGA are built in combination with all utmost grade materials to straightly deliver audio signals as they were generated. With ZYX OMEGA you can feel the original analog sound never experienced before.Lapis lazuli Balancing WeightLapis lazuli Balancing WeightA spherical object fixed to the front nose of ZYX OMEGA is a balancing weight to accord the sweet spot of the cartridge body and the gravity point of vibration system. Having checked up materials and repeated audio monitoring, a nonmetal Lapis lazuli ball having hardness 5.0, specific gravity 2.5, diameter 8mm, and weight about 1 gram is put in at the most appropriate position to form the best cartridge structure. The Labis Lazuli ball used in OMEGA’s other advantage is centroid control. Due to its composition blended of a few kinds of sodalite having spherical shape, vibrating wave flown from the north pole of the ball is absorbed in the crystal architecture mingled inside, and vibrating wave running down the ball surface is finally cancelled at the south pole of the ball.15 items in generatorZYX only succeeded in development of a MC cartridge which does reproduce original stereo sound with a perfect sound balance between the left and right channel.2 Layer Laminate ArmaturesWe made the armature structure have double layers, facing each other with opposite polarity, namely one laminate to face N-polarity and the other S- forming mutually reversed phase positions in order to short-circuit and simultaneously dissolve both eddy-currents generated in each armature.K18 Gold Solid TerminalsMaximum quality 18-karat solid gold matches sapphire terminal board and gets rid of sound coloration unlike conventional plated terminals. Those are apt to create coloration against subtle output signal in micro ampere order due to battery effect between heterogeneous metals.Sapphire Ternimal BoardSapphire Ternimal BoardThis non-metal mineral is hard next to diamond, and has been employed as OMEGA’s and DIAMOND’s terminal board to lock up output terminal pins and statically holds the unit against any sorts of extraneous vibrations. Technical Data (red letters : XH, SH, GH High output Model)TypeMoving Coil (Dynamic) “REAL STEREO” Generator SystemCryogenic TreatmentTemperature: -196 ℃ (-320оF)Output Voltage0.24mV (0.48mV) (3.54cm/sec, 1kHz)Frequency Response ±1dB10 Hz – 100 kHz 20 Hz – 20 kHzChannel Separation> 30dB 〔 1kHz 〕Channel Balance< 0.5dB 〔 1kHz 〕Recommended Tracking Force2.0gm 〔 20 ゜C-25 ゜C 〕Tracking Force Range1.7gm – 3.0gmTrackablity> 60μmEQ Compliancehorizontal vertical15×10-6cm/dyne 12×10-6cm/dyneInternal Impedance4.0 Ω (8.0 Ω)Load Impedance> 100ΩCoil WireX type S type G type6N Crystal Copper φ.035mm/CRYO 5N Silver φ 0.035mm/CRYO 5N Gold φ 0.035mm/CRYOCantilever MaterialBoron solid φ 0.30mmStylusMicro-Ridge Solid Diamond 0.07mmContact Radius, Life Time3μm×60μm, 2000Hour/2.0gmOutput Terminalsφ1.25mm K18 Solid Gold 〔 EIA 〕Terminal BoardPure Sapphire PlateFront Sub WeightLapis lazuli ball φ8mm, 1.2gmDimensionsW (Width) : 16.8mm L (Length) Body / with Terminals : 25.0mm / 29.2mm H (Height) : 16.5mmNet Weight7.8gm (TB2 attached) WORLDWIDE SHIPPING BY EXPEDITED AIR PARCEL WITH TRACKING INFORMATION AT USD50.-International Buyer and/or recipient are responsible for paying all customs taxes/VATs/import duties that MAY be imposed by your country’s customs bureau. More information can be obtained by contacting your local customs office.Appearance, packaging design and specifications are subject to change without notice for the purpose of Improvement by the manufacturer.The images were taken accurately, but slight colour variations may occur. Thank you for your understanding!If you have any other questions, please do not hesitate to contact me.

ZYX Ultimate 4D-G 24K Gold 0.24mV Low Output MC Cartridge, Made in Japan

  • por

This is One set ZYX Ultimate 4D-G 24K Gold 0.24mV Low Output MC Cartridge , made in Japan by ZYX. ZN Premounted.Condition: Brand new in box, not used beforeThe factors that can be documented as data of an audio component such as frequency response and distortion characteristics are only two dimensions i.e. frequency (x) and level (y), whereas a sound is structured by three dimentional factors including time (z). Then a question comes how the time (z) response is presented in an audio equipment. I have found that exactly the time factor Z is very important to represent playback sound quality. Analog recording that contains the same continuously sequential Z information as the sound in natural world is essential in real sound playback as known, and makes it possible to reproduce sounds that are natural and clear, three dimensional image oriented, and sensitive and wide range. ZYX MC phono cartridges are designed and built with this important central factor Z, and unparalleled in the world they enable time response being even over the entire range. Resultant gains are equal sound quality on both left and right channels, flat sound balance, and clear stereo sound field, as widely accepted by users. Further, ZYX 4D model has come out with newly added features each of which is upgraded for better sound image orientation, clearer outline expression, purer stereophonic sound field, and more realistic acoustic space so that you will recognize again the amazing sound information of analog playback. Not exaggeratedly, the Model 4D has four dimensional factors that realize reproducing new three dimensional music whenever, wherever and repeatedly, going beyond time and space. 2 Layer Laminate Armatures An armature which is the frame whereon generator coil is wound is a key part as the center of all mechanical vibration in generator system. It simultaneously affects electrically an audio signal from coil output and quality of reproduced sound. For reproduction over wide range, it is indispensable to reduce numbers of coil turns and equivalent moving mass in vibration system, and to cover resultant drop in output voltage a high-permeability metal having 6 times more efficiency than an empty core is generally used as armature material. On the other hand, however, a metal armature generates induced eddy-current over armature surface and disturbs the flow of audio signal generated by a coil. Induced eddy-current is extremely minute so it might have been considered least influential, but we should not neglect its influence now that we aim higher quality of sound level. ZYX has succeeded in taking the most effective measures to vanish this eddy current into 4D for the first time. We made the armature structure have double layers, facing each other with opposite polarity, namely one laminate to face N-polarity and the other S- forming mutually reversed phase positions in order to short-circuit and simultaneously dissolve both eddy-currents generated in each armature. As the result, double layer armatures showed immeasurable effect and are presenting new world of sound we never experienced before. For sure, you will sense animate sounds which are beyond those mechanically reproduced on every count such as vocal, piano, violin, and every other musical tones in texture, dynamism, too realistic noiseless sound feeling. This is what reproduction of original sound means. Super High Speed Reproduction Engine (magnetic circuit) ZYX 4D is employed with the super high speed reproduction magnetic circuit which was first introduced in the world. This circuit is specially processed to null magnetic resistance within magnetic gap, and enables high speed power generation against signals over entire bandwidth straightly without time delay. Even higher harmonics elements that determine the texture of each musical instrument can be simultaneously reproduced, and delivers quite smooth, natural, dynamic and realistic sound. Semi-Skeleton Body Any phono cartridge aiming higher sound quality should never show body resonance, which feedbacks to vibrate generator system that has to be kept statically. To be free of body resonance, 4D has introduced for the first time in the world a semi-skeleton body without side panels that are most apt to produce resonance. It is basically pillar structured like Parthenon, to be one of the factors of clear sound without inter-modulation. Technical Data Type Moving Coil (Dynamic) “REAL STEREO” Generator System Cryogenic Treatment Temperature: -196 ℃ (-320оF) Output Voltage 0.24mV (0.48mV) (3.54cm/sec, 1kHz) Frequency Response ±1dB 10 Hz – 100 kHz 20 Hz – 20 kHz Channel Separation > 30dB 〔 1kHz 〕 Channel Balance < 0.5dB 〔 1kHz 〕 Recommended Tracking Force 2.0gm 〔 20 ゜C-25 ゜C 〕 Tracking Force Range 1.7gm – 2.5gm Trackability > 60μm /2.0gm EQ Compliance horizontal vertical 15×10-6cm/dyne 12×10-6cm/dyne Internal Impedance 4.0 Ω (8.0 Ω) Load Impedance > 100Ω Coil Wire X type S type G type 6N Crystal Copper φ 0.035mm 5N Silver φ 0.035mm K24 Gold φ 0.035mm Cantilever Material C-1000 Carbon φ0.30mm Stylus Micro-Ridge Solid Diamond□0.1mm Contact Radius, Life Time 3μm×60μm, 2000Hour/2.0gm Output Terminals φ1.25mm gold plated〔EIA〕 Terminal Board Glass Epoxy Plate Dimensions 16.8mm(W)×19.0mm(L)×x15.6mm(H) Net Weight 4.1gm, 6.8gm(TB2), 8.0gm(SB2) WORLDWIDE SHIPPING BY EXPEDITED AIR PARCEL WITH TRACKING INFORMATION AT USD30.-Appearance, packaging design and specifications are subject to change without notice for purpose of Improvement by the manufacturer.International Buyer and/or recipient are responsible for paying all customs taxes/VATs/import duties that MAY be imposed by your country’s customs bureau. More information can be obtained by contacting your local customs office.If you have any other questions, please do not hesitate to contact me.

ZYX OMEGA S/SB2 0.24mV Low Output MC Cartridge, Made in Japan

  • por

Cantilever Material Boron solid φ 0.30mm. 2 Layer Laminate Armatures. Frequency Response. Load Impedance > 100Ω. Front Sub Weight Lapis lazuli ball φ8mm, 1.2gm. Net Weight 7.8gm (TB2 attached). Internal Impedance 4.0 Ω.

ZYX 4D-G/SB2 0.24mV Low Output MC Cartridge, Made in Japan

  • por

This is One set ZYX 4D-G/SB2 0.24mV Low Output MC Cartridge with Silver Base 2, made in Japan by ZYX. Condition: Brand new in box, not used beforeThe factors that can be documented as data of an audio component such as frequency response and distortion characteristics are only two dimensions i.e. frequency (x) and level (y), whereas a sound is structured by three dimentional factors including time (z). Then a question comes how the time (z) response is presented in an audio equipment. I have found that exactly the time factor Z is very important to represent playback sound quality. Analog recording that contains the same continuously sequential Z information as the sound in natural world is essential in real sound playback as known, and makes it possible to reproduce sounds that are natural and clear, three dimensional image oriented, and sensitive and wide range. ZYX MC phono cartridges are designed and built with this important central factor Z, and unparalleled in the world they enable time response being even over the entire range. Resultant gains are equal sound quality on both left and right channels, flat sound balance, and clear stereo sound field, as widely accepted by users. Further, ZYX 4D model has come out with newly added features each of which is upgraded for better sound image orientation, clearer outline expression, purer stereophonic sound field, and more realistic acoustic space so that you will recognize again the amazing sound information of analog playback. Not exaggeratedly, the Model 4D has four dimensional factors that realize reproducing new three dimensional music whenever, wherever and repeatedly, going beyond time and space. 2 Layer Laminate Armatures An armature which is the frame whereon generator coil is wound is a key part as the center of all mechanical vibration in generator system. It simultaneously affects electrically an audio signal from coil output and quality of reproduced sound. For reproduction over wide range, it is indispensable to reduce numbers of coil turns and equivalent moving mass in vibration system, and to cover resultant drop in output voltage a high-permeability metal having 6 times more efficiency than an empty core is generally used as armature material. On the other hand, however, a metal armature generates induced eddy-current over armature surface and disturbs the flow of audio signal generated by a coil. Induced eddy-current is extremely minute so it might have been considered least influential, but we should not neglect its influence now that we aim higher quality of sound level. ZYX has succeeded in taking the most effective measures to vanish this eddy current into 4D for the first time. We made the armature structure have double layers, facing each other with opposite polarity, namely one laminate to face N-polarity and the other S- forming mutually reversed phase positions in order to short-circuit and simultaneously dissolve both eddy-currents generated in each armature. As the result, double layer armatures showed immeasurable effect and are presenting new world of sound we never experienced before. For sure, you will sense animate sounds which are beyond those mechanically reproduced on every count such as vocal, piano, violin, and every other musical tones in texture, dynamism, too realistic noiseless sound feeling. This is what reproduction of original sound means. Super High Speed Reproduction Engine (magnetic circuit) ZYX 4D is employed with the super high speed reproduction magnetic circuit which was first introduced in the world. This circuit is specially processed to null magnetic resistance within magnetic gap, and enables high speed power generation against signals over entire bandwidth straightly without time delay. Even higher harmonics elements that determine the texture of each musical instrument can be simultaneously reproduced, and delivers quite smooth, natural, dynamic and realistic sound. Semi-Skeleton Body Any phono cartridge aiming higher sound quality should never show body resonance, which feedbacks to vibrate generator system that has to be kept statically. To be free of body resonance, 4D has introduced for the first time in the world a semi-skeleton body without side panels that are most apt to produce resonance. It is basically pillar structured like Parthenon, to be one of the factors of clear sound without inter-modulation. Technical Data Type Moving Coil (Dynamic) “REAL STEREO” Generator System Cryogenic Treatment Temperature: -196 ℃ (-320оF) Output Voltage 0.24mV (3.54cm/sec, 1kHz) Frequency Response ±1dB 10 Hz – 100 kHz 20 Hz – 20 kHz Channel Separation > 30dB 〔 1kHz 〕 Channel Balance < 0.5dB 〔 1kHz 〕 Recommended Tracking Force 2.0gm 〔 20 ゜C-25 ゜C 〕 Tracking Force Range 1.7gm – 3.0gm Trackablity > 60μm EQ Compliancehorizontal vertical 15×10-6cm/dyne 12×10-6cm/dyne Internal Impedance 4.0 Ω Load Impedance > 100Ω Coil WireG Type 5N Gold φ 0.035mm/CRYO Cantilever Material Boron solid φ 0.30mm Stylus Micro-Ridge Solid Diamond 0.07mm Contact Radius, Life Time 3μm×60μm, 2000Hour/2.0gm Output Terminals φ1.25mm gold plated 〔EIA〕 Terminal Board Glass Epoxy Plate Dimensions W (Width) : 16.8mm L (Length) Body / with Terminals : 19.0mm / 23.0mm H (Height) : 15.5mm Net Weight 4.0gm, 7.9gm(SB2) SHIPPING TO WORLDWIDE BY EMS SPEEDPOST WITH TRACKING INFORMATION AT USD30.-Buyer is responsible for your country’s (destination) import taxes/VATs/customs duty. If you have any questions, please do not hesitate to contact me.

ZYX 4D-G/SB2 24K Gold 0.24mV Low Output MC Cartridge, Made in Japan

  • por

ZN Premounted. Resultant gains are equal sound quality on both left and right channels, flat sound balance, and clear stereo sound field, as widely accepted by users. ZYX 4D is employed with the super high speed reproduction magnetic circuit which was first introduced in the world.

ZYX Premium Omega X, 0.24mV Low Output MC Cartridge, Made in Japan

  • por

This is One set ZYX Premium Omega X 0.24mV Low Output MC Cartridge , coil in 6N Crystal Copper φ.035mm/CRYO , made in Japan by ZYX. Condition: Brand new in box, not used beforeThe world’s first High-speed generation system Eddy currents which occurs in generation system raises the magnetic impedance in the circuit and affects to the transient response of the sound signal, and as a result, the reproduced sound is badly deteriorated. Eddy currents which occur on a pair of opposite pole faces (N pole, S pole) reverse phase each other. There should be a solution to eliminate such eddy currents. However, ZYX has discovered that there are two pairs of the eddy currents existing in the magnetic circuit and therefore, it is necessary to neutralize and eliminate these two pairs of the eddy currents at once. The “Premium” series cartridges are equipped with a new “Balanced type eddy current elimination mechanism” which we developed to solve this problem, and succeeded to reproduce an accurate time axis of the sound signal by non-magnetic impedance. Employment of a new suspension wire The new material which was not thought about in the past are developed one after another. One of them is a thin and tough material while being flexible. The suspension wire of MC cartridge is to hold and position the fulcrum of the rotary vibration of the cantilever, and a hard metal wire like piano wire has been commonly used conventionally. Instead of a hard metal wire, we employed in Premium series new optimal material without aging, tough and of superior temperature characteristics. This brought an improvement in tracking ability and a sense of pitch that soaks into a soul. As a result, the true analog sound of Premium series was further improved in the sense of reality. Lapis lazuli Balancing Weight A spherical object fixed to the front nose of Premium OMEGA is a balancing weight to accord the sweet spot of the cartridge body and the gravity point of vibration system. Having checked up materials and repeated audio monitoring, a nonmetal Lapis lazuli ball having hardness 5.0, specific gravity 2.5, diameter 8mm, and weight about 1 gram is put in at the most appropriate position to form the best cartridge structure. The Labis Lazuli ball used in OMEGA’s other advantage is centroid control. Due to its composition blended of a few kinds of sodalite having spherical shape, vibrating wave flown from the north pole of the ball is absorbed in the crystal architecture mingled inside, and vibrating wave running down the ball surface is finally cancelled at the south pole of the ball. 15 items in generator ZYX only succeeded in development of a MC cartridge which does reproduce original stereo sound with a perfect sound balance between the left and right channel. 2 Layer Laminate Armatures We made the armature structure have double layers, facing each other with opposite polarity, namely one laminate to face N-polarity and the other S- forming mutually reversed phase positions in order to short-circuit and simultaneously dissolve both eddy-currents generated in each armature. K18 Gold Solid Terminals Maximum quality 18-karat solid gold matches sapphire terminal board and gets rid of sound coloration unlike conventional plated terminals. Those are apt to create coloration against subtle output signal in micro ampere order due to battery effect between heterogeneous metals. Sapphire Ternimal Board This non-metal mineral is hard next to diamond, and has been employed as OMEGA’s and DIAMOND’s terminal board to lock up output terminal pins and statically holds the unit against any sorts of extraneous vibrations. Technical Data Type Moving Coil (Dynamic) “REAL STEREO” Generator System Cryogenic Treatment Temperature: -196 ℃ (-320оF) Output Voltage 0.24mV (3.54cm/sec, 1kHz) Frequency Response ±1dB 10 Hz – 100 kHz 20 Hz – 20 kHz Channel Separation > 30dB 〔 1kHz 〕 Channel Balance < 0.5dB 〔 1kHz 〕 Recommended Tracking Force 2.0gm 〔 20 ゜C-25 ゜C 〕 Tracking Force Range 1.7gm – 2.5gm Trackablity > 60μm EQ Compliancehorizontal vertical 15×10-6cm/dyne 12×10-6cm/dyne Internal Impedance 4.0 Ω Load Impedance > 100Ω Coil WireX type S type G type 6N Crystal Copper φ.035mm/CRYO 5N Silver φ 0.035mm/CRYO 5N Gold φ 0.035mm/CRYO Cantilever Material Boron solid φ 0.30mm Stylus Micro-Ridge Solid Diamond 0.07mm Contact Radius, Life Time 3μm×60μm, 2000Hour/2.0gm Output Terminals φ1.25mm 18 Karat Gold 〔 EIA 〕 Terminal Board Pure Sapphire Plate Front Sub Weight Lapis lazuli ball φ8mm, 1.2gm Dimensions W (Width) : 16.8mm L (Length) Body / with Terminals : 25.0mm / 29.2mm H (Height) : 16.5mm Net Weight 6.7gm (TB2 attached) SHIPPING TO WORLDWIDE BY EXPEDITED PARCEL WITH TRACKING INFORMATION AT USD30.-Buyer is responsible for your country’s (destination) import taxes/VATs/customs duty. If you have any questions, please do not hesitate to contact me.